With the iNfinity App, we take each and every item in the db and break it up into 6 different amplitudes. Our research indicates that a frequency with 6 different amplitudes will actually penetrate the body much deeper. However with the different amplitudes, as the iNfinity cycles through the respective amplitudes or pitches the sounds will go from soft to high. The software the frequencies the higher the amplitude. So as we are cycling through all the different items in the balancing tray it is natural to hear the frequencies go from soft to high as it cycles through the respective items.
For items with a number near zero there is no need for correction/balancing? For large numbers in psychic attack for example, does this mean that there has been psychic attack done on the client or is it measuring fear of psychic attack? And is this the same for dark forces and entities?

When a SCAN is complete, the iNfinity or iLife is looking for the probability or a reaction for the respective tested items. It is then up the technician to apply this information to the clinical context of the client and discuss the results with the client. Relate the clients symptoms, emotions and reactions to the results displayed and ask yourself why the client has reacted to these individual items. In designing the APP, we could not create a "magic bullet effect" that a high number is the considered absolute and correct number. The APP will show the disturbance or probability and then you need to apply your own experience and clinical context. As an option it would be advisable to go to the AURA panel and review the colors there. If there are dark colors around the AURA, then this could imply psychic attack. Equally your client may seem anxious and concerned about psychic attack. In any case as it is a high number, you would want to balance the item regardless as if the client is under psychic attack or has a fear of psychic attack you would want to balance and address that specific issue.
Hi Zsolt
Jim sent me this link! Really enjoying..
http://www.youtube.com/watch?v=I6D7DYRH06M&feature=youtu.be

Couple of things...
Set the timer down to zero and that will run the session indefinitely
The Balance rx and Multi Layer rx Tray are very different in that we see each panel of the program as a different layer/facet of the body. When using the Balance rx, it is designed for balancing items just on that specific page whereas the Multi Layer rx, you can add items from all the panels and then provide balancing at a later date.
Lets visualize this concept:
From the Davinci Screen, you decide to go to Toxicity Panel and run a SCAN.
The highest item in Toxicity Screen is Heavy Metal. You want to balance that now but "sense" this could be causing a host of problem related issue. So you drag to balance rx and balance for 3 mins BUT you also drag to Multi Layer rx tray for use at a later stage.
Now you go to Body Systems and run a SCAN and then see Lymphatic System are stressed and after speaking with client you decide the Lymphatic Stressors is related to the heavy metal toxicity. So now you drag the Lymphatic item to the Multi Layer rx. Next you decide to go to the Risk Panel and run a SCAN. The highest Rick is Degeneration. So now you feel the degeneration is linked to the lymphatic system which is also linked to the Heavy Metal Toxicity. All of these items are in the Multi Layer rx tray, select the timer for 3 mins and now you are balancing all these items in correlation to one another. Does this make sense? Basically the results you get in terms of harmony, alignment and energy flow will now be related to this combination balancing session.

The Geo's should be placed over any specific area where you want to provide localized treatment and balancing. So for example, you have a knee injury, place the Geo's directly over the knee. You want to balance the Brow Chakra, place the Geo's directly on the Brow




For general toning place the Geo's on the inside of the wrists, while for specific brain entrainment place them on either side of the head.
Karen and Ryan Williams
 


Quantum Technologies -
How does it work?

Lets take a look at quantum science from its beginnings to today and the future.  The word “quantum” is frequently applied to everything that might appear to be new or cutting edge technology. This is not the case for two reasons, firstly because quantum theory is now  almost one hundred years old, and secondly because – when asked – most people who use this word might not be able to explain why they use it.
    Originally the word ‘quantum’ was first applied to mainstream physics by Heisenberg when he discovered that energy is not a continuous stream but in fact consists of tiny packages, which he called quanta. From this discovery, a whole science developed that was called Quantum Theory, and with it arose a lot of misconceptions on what quantum theory is really all about.... Read More Click here

Questions? Contact sales@quantum-life.com or call + 1-805-284-5213 or toll free 877-711-3233